VeraSol Product Database

Snapshot Details

Product Information

Brand Product brand name as listed on consumer-facing materials, such as product package, nameplate, or product specification sheet Startech
Product Type Type of display technologies the product uses, ie LCD display with LED backlit or CCFL-backlit technology LED-backlit LCD Display
Model Number Model number as listed on consumer-facing materials, such as product package, nameplate, or product specification sheet ST-0019
Diagonal Screen Size [in] Size of a TV screen, described by the length of its diagonal 17
Power Supply Type AC/DC
Manufacturer Company that manufactured the product Startech
Country of Manufacture Country where the product was manufactured Not stated
Warranty [months] Length of warranty provided by a manufacturer, distributor, or retailer 12
Rated Input Voltage [V] 100-240VAC / 12 V

Display

On Mode Power Consumption

Nominal Conditions: On Mode Power Consumption [W] Amount of power required to operate the product, measured in the active-use “On” mode 12.4
Nominal Conditions: On Mode Average Power per Screen Size [W/cm2] TV efficiency, defined as the average amount of power consumed per square centimeter of the screen size A lower value means higher efficiency 0.0136
Nominal Conditions: Maximum On Mode Power [W] Maximum amount of power required to operate the product when the product’s volume and brightness are set at maximum levels 17.7
Over-Voltage Conditions: On Mode Power Consumption [W] Measured during voltage fluctuation conditions, eg during battery charging and discharging cycles Product is tested with an increased voltage (15% increase from the manufacturer’s rated input voltage) 12.4
Under-Voltage Conditions: On Mode Power Consumption [W] Measured during voltage fluctuation conditions, eg during battery charging and discharging cycles Product is tested with a decreased voltage (15% decrease from the manufacturer’s rated input voltage) 12.5
Post Environment: On Mode Power Consumption [W] Measured after the product is exposed to 40°C ± 2°C temperature and 93% ± 3% relative humidity for a minimum of 24 hours, replicating environmental factors that off-grid products are typically used in 12.3

Standby Mode Power Consumption

Nominal Conditions: Standby Mode Power Consumption [W] Amount of power required when the product is on standby mode (when it is plugged in but turned off) 0.2
Over-Voltage Conditions: Standby Mode Power Consumption [W] Amount of power required when the product is on standby mode, measured in over-voltage conditions (15% increase of rated input voltage) 0.3
Under-Voltage Conditions: Standby Mode Power Consumption [W] Amount of power required when the product is on standby mode, measured in under-voltage conditions (15% decrease of rated input voltage) 0.2
Post Environment: Standby Mode Power Consumption [W] Amount of power required when the product is on standby mode, measured after 24 hours of environmental exposure 0.2

Luminance

Luminance Home Picture Mode [Cd/m2] Brightness of display in “Home Picture” modes; Larger values mean brighter 66
Luminance Retail Picture Mode [Cd/m2] Brightness of display in “Retail Picture” modes; Larger values mean brighter 75

Viewing Angle

Horizontal Viewing Angle [degree], tested at 1/2 luminance Angle at which users can still view the display clearly and an indication of the display quality 118
Horizontal Viewing Angle [degree], tested at 1/10 luminance Angle at which users can still view the display clearly and an indication of the display quality 160
Vertical Viewing Angle [degree], tested at 1/2 luminance Angle at which users can still view the display clearly and an indication of the display quality 107
Vertical Viewing Angle [degree], tested at 1/10 luminance Angle at which users can still view the display clearly and an indication of the display quality 162

Ingress Protection

Ingress Protection Rating [IP number] Rates the effectiveness of the sealing of electrical enclosures against intrusion from foreign bodies (eg fingers, tools, dirt, etc) IP30

Connectivity

Product Quality Inspection

Is the TV of good build quality and free of any visible defects? Cannot be determined
Notes About Quality Internal cables quite untidy and LCD panel looked like old stock and was discolored.
Is the TV clearly marked with a standard nameplate? No
Notes About Nameplate No brand name, model number or serial number
Does the TV's packaging include appropriate information? Cannot be determined
Notes About Packaging Packaging covered with tape, hiding some printed information
Does the TV come with appropriate documentation? Yes
Notes About Documentation '1 year warranty' printed on box

Off-Grid Compatibility

Is the TV able to function properly during and after the voltage fluctuation test? Yes
Notes About Voltage Fluctuation Test N/A
Does the TV have its own low voltage disconnect (LVD) & reconnect (LVR) circuit or similar automatic shutdown mechanism to protect batteries from unintended drainage? Yes
Notes About LVD and LVR Test As the voltage was reduced the picture was too dark to view at 8.0 volts but the sound remained constant until the sound went off at 4.5 volts and the set entered standby mode at 4.2 volts. When the voltage was increased, the set could be switched out of standby and function normally when 8.3 volts was reached. This was considered to be a correctly operating LVD/LVR function.
Does the TV have a timer function which enables automatic shutdown after a set period of time? Yes
Is the LVD/LVR/timer function adequately described in the user manual or product packaging? No
Does the TV have any power saving features? Auto Sleep, Sleep Timer

Sampling And Testing Information

Sample Location Where the product was randomly sampled from Kampala (Uganda)
Retail Price [USD] Retail price of the product, documented at the time of purchase 55
Test Completion Date [MM/DD/YYYY] 5/24/2021
Test Laboratory Name Intertek

Awards

Global LEAP Awards Whether product was identified as a Winner or Finalist of the Global LEAP Awards No